products
产品001

NEPEM®全氟质子膜N-11系列

产品001
产品描述
规格参数

NEPEM®全氟质子膜N-11系列是科润公司采用钢带流延法生产的单一组分全氟磺酸H型全氟离子膜产品。全氟质子膜在各种电解槽和电池中作为分隔阴阳极的固态电解质,NEPEM®膜具有阳离子单向通过的属性,由于采用聚四氟乙烯作为主链,调节出最为合适的分子量及离子交换容量,NEPEM®膜具有耐化学性和耐久性的特点。广泛用于:钒电池、液流电池、燃料电池、电解水制氢等领域。

 

 

尺寸:
a.卷材:
标准卷:0.61m*100m
     0.80m*100m
特殊规格:0.2m/0.3m/0.4m幅宽,长度随意。(特殊规格订购量需在50平米以上)  
b.片材:
宽:  0.30 m (最小) 至 1 m (最大)
长度:0.30 m (最小) 至 1 m (最大)
说明:膜的供货尺寸都是基于干燥的膜产品,在23℃和50%相对湿度条件下。空气的湿度、温度均会影响其尺寸,需要我公司代为预处理的产品我们保证为正公差,且需预处理产品均为片材。

包装:

膜的包装,采用卷装,数量较小时无卷芯,数量较多时含卷芯。由于全氟离子膜不同温度湿度下尺寸会有变化,NEPEM®全氟离子膜均使用硬质保护膜打底保护,以便于MEA的喷涂及裁减尺寸的稳定性,外包装采用塑料桶或者硬质纸箱包装。
特殊尺寸和包装请联系销售人员。


回收及处理:
由于焚烧时本产品会挥发出有毒有害物质,可采用填埋方法处理。只有在焚烧炉能够清除氟化氢和其他酸性燃烧产物的情况下才能焚烧。对本产品的处置必须遵守当地的相关法律法规。
本公司提供全氟离子膜的废料有偿回收服务,详情请联系科润公司销售人员

 

Perfluorinated ion exchange membrane ( NEPEM® -11Series ) Description

NEPEM® PFSAmembranes are non-reinforced films based on PFSA polymer, a perfluorosulfonic acid/PTFE copolymer in the acid (H+ ) form. NEPEM PFSA membranes are widely used for Proton Exchange Membrane (PEM) fuel cells and water electrolyzers. The membrane performs as a separator and solid electrolyte in a variety of electrochemical cells which require the membrane to selectively transport cations across the cell junction. The polymer is chemically resistant and durable. Widely used: vanadium battery, liquid flow battery, fuel cell, electrolysis water, hydrogen production and other fields

Size

Roll Standard roll:0.61m*100m 0.80m*100m Custom size:0.2m、0.3m、0.4m width with random length。 (There is a 50 m 2 minimum order requirement for non-standard roll widths andlengths.) Once opened and exposed to the environment, the membrane will equilibrate to the ambient relative humidity, and change in dimensions accordingly. Membrane order dimensions are specified and measured at 23°C and 50% Relative Humidity. The products that require our company to pretreat are guaranteed to be positive tolerances, and the products required for pretreatment are all sheets.

Package: The packaging of the film is wrapped in a small volume and has no coil core. As the size of the perfluoro ion membrane varies at different temperature and humidity, the NEPEM perfluoroionic membrane is protected by the hard protective film to facilitate the spraying of MEA and the stability of the size reduction. The outer packaging is packed in plastic barrels or hard cartons. Please contact the salesperson for the special size and packing.

 capable of scrubbing out hydrogen fluoride and other acidic combustion products. Treatment, storage, transportation, and disposal must be in accordance with applicable federal, state/provincial and local regulations. Our company provides full recovery service for waste materials of fluorine ion membrane. For details, please contact sales staff of run company. 

For more information about NEPEM® PFSA membranes :

Email:sales@bestpem.com 

扫二维码用手机看
未找到相应参数组,请于后台属性模板中添加

1.厚度和克重性能1

型号

厚度(μm)

克重(g/m2)

N-1125

62

122

N-113

75

148

N-1135

80

172

N-114

100

197

N-115

125

246

N-117

175

295

N-1110

220

432

2.物理和其它性能

物理性能

技术指标

测试方法

拉伸测试(23°C, 50% RH)

 

 

拉伸强度(最大,MPa)

≥28

GB/T 20042.3-2022

弹性模量(MPa)

≥400

GB/T 20042.3-2022

断裂伸长率(%)

≥120

GB/T 20042.3-2022

比重

1.98

其它性能

 

 

电导率2(S/cm)

≥0.100

GB/T 20042.3-2022

酸容量3(meq/g)

1.00±0.05

GB/T 20042.3-2022

3.溶胀性能

溶胀性能

技术指标

测试方法

含水量4(%)

5.0±3.0

GB/T 20042.3-2022

吸水率5(%)

50.0±5.0

GB/T 20042.3-2022

厚度溶胀率 (23°C, 50% RH)

 

 

23°C浸泡(%)

≤5

GB/T 20042.3-2022

100°C浸泡(%)

≤15 GB/T 20042.3-2022

线性溶胀率 (23°C, 50% RH)

 

 

23°C浸泡(%)

≤5 GB/T 20042.3-2022

100°C浸泡(%)

≤18 GB/T 20042.3-2022

1膜测试前在23°C, 50% RH环境下至少放置24h 2电导率测试是23°C, 100% RH下进行。

3酸容量测试是采用烧碱溶液滴定膜中的磺酸根总量,从而推算出膜的酸容量或者交换当量。

423°C, 50% RH环境下相对于干膜的含水量。

5膜在100°C, 水煮1h后相对于干膜的吸水率。

 

Properties of NEPEM® PFSA membranes.

1. Thickness and Basis Weight Properties1

Membrane Type

Thickness(microns)

Weight(g/m2)

N-112

50

99

N-1125

62

122

N-113

75

148

N-1135

80

172

N-114

100

197

N-115

125

246

N-117

175

295

N-1110

220

432

2. Physical and Other Properties

Physical and Other Properties

Index Parameters

Test Method

Tensile Test

(23°C, 50% RH)

 

 

Tensile Strength(Max., MPa)

≥28

GB/T 20042.3-2022

Tensile Modulu(MPa)

≥400

GB/T 20042.3-2022

Elongation at break (%)

≥120

GB/T 20042.3-2022

Specific Gravity

1.98

Other Properties

 

 

Conductivity 2(S/cm)

≥0.100

GB/T 20042.3-2022

Acid Capacity 3(meq/g)

1.00±0.05

GB/T 20042.3-2022

3. Hydrolytic Properties

Hydrolytic Properties

Index Parameters

Test Method

Water Content 4(%)

5.0±3.0

GB/T 20042.3-2022

Water Uptake 5(%)

50.0±5.0

GB/T 20042.3-2022

Thickness Change, % increase

 

 

from 50% RH, 23°C to water soaked, 23°C

≤5

GB/T 20042.3-2022

from 50% RH, 23°C to water soaked, 100°C

≤15 GB/T 20042.3-2022

Linear expansion, % increase

 

 

from 50% RH, 23°C to water soaked, 23°C

≤5 GB/T 20042.3-2022

from 50% RH, 23°C to water soaked, 100°C

≤18 GB/T 20042.3-2022

1Measurements taken with membrane conditioned to 23°C, 50% RH.

2Conductivity measurements a 23 °C, 100% RH.

3A base titration procedure measures the equivalents of sulfonic acid in the polymer, and uses the measurement to calculate the acid capacity or equivalent weight of the membrane.

4Water content of membrane conditioned to 23 °C and 50% RH (dry weight basis).

5Water uptake from dry membrane to conditioned in water at 100 °C for 1 hour (dry weight basis).

 



 

联系我们

 

 

18513867719

18610561199 

 

地址:苏州市吴江区长安路东侧吴江科技创业园5号楼4层

Email:sales@bestpem.com

销售二维码

销售二维码

公众号二维码

公司公众号

版权所有©苏州科润新材料股份有限公司  苏ICP备2021016464号    网站制作:新网