products
产品004

NEPEM®全氟复合离子膜N-41PTFE系列

产品004
产品描述
规格参数

NEPEM®全氟复合离子膜N-41PTFE系列是科润公司采用钢带流延法生产的复合全氟磺酸H型全氟离子膜产品。全氟离子膜在各种电解槽和电池中作为分隔阴阳极的固态电解质,NEPEM®膜具有阳离子单向通过的属性,由于采用高强度聚四氟乙烯网布作为支撑层,配合最为合适的分子量及离子交换容量的全氟磺酸树脂,NEPEM®-41系列复合全氟离子膜具有超强耐化学性和耐久性的特点。广泛用于:氯碱工业、电解水制氢、二氧化氯发生器、氨基酸精制、金盐制备、蚀刻液回收铜、电镀等领域。

包装:

尺寸:    
a.片材:
宽:   0.20 m (最小) 至 1.2 m (最大)
长度:0.20 m (最小) 至 1.2 m (最大)
说明:膜的供货尺寸都是基于干燥的膜产品,在23℃和50%相对湿度条件下。空气的湿度、温度均会影响其尺寸,需要我公司代为预处理的产品我们保证为正公差,且需预处理产品均为片材。

膜的包装,采用卷装,数量较小时无卷芯,数量较多时含卷芯。由于全氟离子膜不同温度湿度下尺寸会有变化,NEPEM®全氟离子膜均使用硬质保护膜打底保护,以便于MEA的喷涂及裁减尺寸的稳定性,外包装采用塑料桶或者硬质纸箱包装。  
特殊尺寸和包装请联系销售人员。

回收及处理:
由于焚烧时本产品会挥发出有毒有害物质,可采用填埋方法处理。只有在焚烧炉能够清除氟化氢和其他酸性燃烧产物的情况下才能焚烧。对本产品的处置必须遵守当地的相关法律法规。 本公司提供全氟离子膜的废料有偿回收服务,详情请联系科润公司销售人员。

NEPEM® N-417PTFE, N-4110PTFE

MEMBRANES FOR electrolysis

Product Information

NEPEM® PFSA N-417PTFE and N-410PTFE membranes are widely used in chlor-alkali industries, electro-dialysis, recovery of copper from etching solutions, synthesis for gold potassium cyanide , chlorine dioxide, and electrochemical reaction for amino acid. The membrane performs as a conducting separator and solid electrolyte in a variety of electrochemical cells which require the membrane to selectively transport cations across the cell junction.

NEPEM® N-41PTFE series membrane are reinforced membranes based on chemically stable ® perfluorosulfonic acid (PFSA) copolymer. Incorporation of the PTFE mesh reinforcement improves the mechanical property of the composite membrane and allows the membrane to restrict its swelling. The membranes show significant improvements in features such as better resistance to chemical attack and longer operating durability under electrolysing cell conditions.

FIGURE 1: NEPEM® N-41PTFE Series membrane Schematic Diagram

Order and Packaging Information

Membrane dimensions are based on dry product conditioned at 23 °C and 50% relative humidity(RH) before cutting. The moisture content of the membranes will have an influence on their dimensions changes, including in the length, width, and thickness directions.

The standard product specifications for membrane pieces include:

 Width: 0.20 m (Min.) To 1 .20 m (Max.)

 Length: 0.20 m (Min.) To 1.20 m (Max.)

The membrane for cut pieces will depend on the size and quantity of the customer’s order requirements. All the membranes were pretreated which can be used directly. All the flatted membranes are shipped on a roll. Flat membranes are directly wound into a small roll. The membranes are protected with a polyethylene wrap and inner packaging, then placed in shipping hard cartons. Membrane pieces can be cut to non standard sizes, and special packaging provided at additional cost. Please contact our sales staff for details and availability.

 Recommended Storage Conditions

Prior to opening the original shipping box, the membrane does not require environmentally controlled storage. Membrane should be kept sealed in its original packaging until needed. After opening the package, store the material in a temperature and humidity controlled environment(temperature 25.0±5.0°C and humidity 45±5.0%RH). Acclimatize the membrane to the manufacturing environment for at least 48 hours prior to use. Once opened and exposed to the environment, the membrane will equilibrate to the ambient relative humidity, and change in dimensions accordingly. Scrap Disposal Preferred disposal options are recycling and landfill. Incinerate only if incinerator is capable of scrubbing out hydrogen fluoride and other acidic combustion products. Treatment, storage, transportation, and disposal must be in accordance with applicable national laws and regulations. The process of recycling waste Fluoropolymer Resins is extremely complicated as there are many parts to be recycled and many hazardous materials to remove. Therefore, we recommend that it is more appropriate for customers to hand over the waste film to us for recycling.

For more information about NEPEM® PFSA membranes 

Email:sales@bestpem.com 

扫二维码用手机看
未找到相应参数组,请于后台属性模板中添加

1.厚度和克重性能1

型号

厚度(μm)

克重(g/m2)

N-417

260

340

N-4110

360

470

2.物理和其它性能

物理性能

技术指标

测试方法

拉伸测试(23°C, 50% RH)

 

 

拉伸强度(最大,MPa)

≥40

GB/T 20042.3-2022

断裂伸长率(%)

≥100

GB/T 20042.3-2022

比重

1.35

其它性能

 

 

电导率2(S/cm)

≥0.100

GB/T 20042.3-2022

酸容量3(meq/g)

1.00±0.05

GB/T 20042.3-2022

3.水解性能

水解性能

技术指标

测试方法

含水量4(%)

5.0±3.0

GB/T 20042.3-2022

吸水率5(%)

50.0±5.0

GB/T 20042.3-2022

厚度溶胀率 (23°C, 50% RH)

 

 

23°C浸泡(%)

≤5

GB/T 20042.3-2022

100°C浸泡(%)

≤10

GB/T 20042.3-2022

线性溶胀率 (23°C, 50% RH)

 

 

23°C浸泡(%)

≤2

GB/T 20042.3-2022

100°C浸泡(%)

≤5

GB/T 20042.3-2022

1膜测试前在23°C, 50% RH环境下至少放置24h

2电导率测试是23°C, 100% RH下进行。

3酸容量测试是采用烧碱溶液滴定纯树脂中的磺酸根总量,从而推算出树脂的酸容量或者交换当量。

423°C, 50% RH环境下相对于干膜的含水量。

5膜在100°C, 水煮1h后相对于干膜的吸水率。

 

Properties of NEPEM® PFSA membranes.

1. Thickness and Basis Weight Properties1

Membrane Type

Thickness(microns)

Weight(g/m2)

N-417

260

340

N-4110

360

470

2. Physical and Other Properties

Physical and Other Properties

Index Parameters

Test Method

Tensile Test (23°C, 50% RH)

 

 

Tensile Strength(Max., MPa)

≥40

GB/T 20042.3-2022

Elongation at break (%)

≥100

GB/T 20042.3-2022

Specific Gravity

1.35

Other Properties

 

 

Conductivity 2(S/cm)

≥0.100

GB/T 20042.3-2022

Acid Capacity 3(meq/g)

1.00±0.05

GB/T 20042.3-2022

3. Hydrolytic Properties

Hydrolytic Properties

Index Parameters

Test Method

Water Content 4(%)

5.0±3.0

GB/T 20042.3-2022

Water Uptake 5(%)

50.0±5.0

GB/T 20042.3-2022

Thickness Change, % increase

 

 

from 50% RH, 23°C to water soaked, 23°C

≤5

GB/T 20042.3-2022

from 50% RH, 23°C to water soaked, 100°C

≤10

GB/T 20042.3-2022

Linear expansion, % increase

 

 

from 50% RH, 23°C to water soaked, 23°C

≤2

GB/T 20042.3-2022

from 50% RH, 23°C to water soaked, 100°C

≤5

GB/T 20042.3-2022

1Measurements taken with membrane conditioned to 23°C, 50% RH.

2Conductivity measurements a 23 °C, 100% RH.

3A base titration procedure measures the equivalents of sulfonic acid in the polymer, and uses the measurement to calculate the acid capacity or equivalent weight of the pure polymer.

4Water content of membrane conditioned to 23 °C and 50% RH (dry weight basis).

5Water uptake from dry membrane to conditioned in water at 100 °C for 1 hour (dry weight basis).

上一个
下一个

联系我们

 

 

18513867719

18610561199 

 

地址:苏州市吴江区长安路东侧吴江科技创业园5号楼4层

Email:sales@bestpem.com

销售二维码

销售二维码

公众号二维码

公司公众号

版权所有©苏州科润新材料股份有限公司  苏ICP备2021016464号    网站制作:新网